 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SENSITRON SEMICONDUCTOR TECHNICAL DATA Datasheet 4171, Rev. - SPM6M070-020D Three-Phase MOSFET BRIDGE, With Gate Driver and Optical Isolation DESCRIPTION: A 200 VOLT, 70 AMP, THREE PHASE MOSFET BRIDGE ELECTRICAL CHARACTERISTICS PER MOSFET DEVICE (Tj=250C UNLESS OTHERWISE SPECIFIED) SYMBOL MI N TYP MAX UNIT PARAMETER MOSFET SPECIFICATIONS Drain-to-Source Breakdown Voltage ID = 500 A, VGS = 0V Continuous Drain Current TC = 25 OC TC = 90 C Pulsed Drain Current, Pulse Width limited by TjMax Gate to Source Voltage Gate- Source Leakage Current , VGE = +/-20V Zero Gate Voltage Drain Current VDS = 200 V, VGS=0V Ti=25oC VDS= 160 V, VGS=0V Ti=125oC Static Drain-to-Source On Resistance, O O BVDSS ID IDM VGS IGSS ICSS 200 - - V - - 70 60 A - - 300 +/-20 +/- 200 A V nA 1 3 Tj = 25 C Tj = 125 O mA mA V RDSon - 0.023 0.050 0.025 - C ID= 50A, VGS = 15V, Maximum Thermal Resistance Maximum operating Junction Temperature Maximum Storage Junction Temperature RJC Tjmax Tjmax -40 -55 0.35 150 150 o C/W o C C o * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 1 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. Over-Temperature Shutdown Over-Temperature Shutdown Over-Temperature Output Over-Temperature Shutdown Hysteresis Tsd Tso 90 100 10 20 115 o C 10mV/oC o C DIODES CHAR ACTERISTICS Continuous Source Current, TC = 90 OC Diode Forward Voltage, IS = 50A, Tj = 25 C O IS VSD trr - - 60 1.5 A V nsec Diode Reverse Recovery Time (IS=50A, VDD=100V , di/dt=100 A/s) 220 - Gate Driver Supply Voltage Input On Current Opto-Isolator Logic High Input Threshold Input Reverse Breakdown Voltage Input Forward Voltage @ Iin = 5mA Under Voltage Lockout ITRIP Reference Voltage (1) Input-to-Output Turn On Delay Output Turn On Rise Time Input-to-Output Turn Off Delay Output Turn Off Fall Time @ VCC=100V, ID=50A, TC = 25 Input-Output Isolation Voltage VCC HIN, LIN Ith BVin VF VCCUV Itrip-ref tond tr toffd tf 1500 V 10 2 5.0 11.5 2.5 1.6 1.5 2.6 TBD TBD TBD TBD 15 20 5.0 1.7 12.5 2.7 V mA mA V V V V nsec (1) ITRIP Cycle-by cycle current limit is internally set to 70A peak. The set point can be lowered by connecting a resistor between Itrip-ref and Gnd. The set point can be increased by connecting a resistor between Itrip-ref and +5V ref * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 2 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. - Pin Description Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Function Isolated Input for High-side MOSFET of Phase A Return for Input at 1 NC Isolated Input for Low-side MOSFET of Phase A Return for Input at 4 NC Isolated Input for High-side MOSFET of Phase B Return for Input at 7 NC Isolated Input for Low-side MOSFET of Phase B Return for Input at 10 Isolated Input for High-side MOSFET of Phase C Return for Input at 12 Isolated Input for Low-side MOSFET of Phase C Return for Input at 14 NC NC Pin Number 18 19 20 21 22 23 24 25 26 27 28 &29 30 & 31 32 & 33 34 & 35 36 & 37 Case Function NC +15V Input +15V Rtn (Signal Ground) SD (3) (3) Fault Output (3) (3) Fault Clear Input +5V Output Over-Current Trip Set Point (3) DC Bus Current Output with Total Gain of 0.06 V/A Case Temperature Output with Gain of 0.010 V/oC Phase A Output Phase B Output Phase C Output DC Bus "+VDC Return" DC Bus "+VDC" Input Isolated From All Terminals * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 3 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. Schematic Diagram: 10 10 10 10 10 10 0.005 * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 4 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. Package Drawing Top View (All dimensions are in inches, tolerance is +/- 0.010") * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 5 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. - Package Pin Locations (All dimensions are in inches; tolerance is +/- 0.005" except otherwise specified) * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 6 of 7 SPM6M070-020D SENSITRON TECHNICAL DATA Datasheet 4171, Rev. Application Notes: a- Shutdown Feature: 1- Pin 21, SD is a dual function input/output, active low input. It is internally pulled high. As a low input, it shuts down all MOSFETs regardless of the Hin and Lin signals. 2- SD is also internally activated by the over-temperature shutdown, over-current limit, undervoltage shutdown, and desaturation protection. 3- Over-temperature shutdown, and over-current limit are not latching features. 4- Under-voltage shutdown is automatically reset once the VCC rises above the 12.1V threshold limit. 5- Desaturation shutdown is a latching feature and internally reset. 6- When any of the internal protection features are activated, SD is pulled down. 7- SD can be used to shutdown all MOSFETs by an external command. An open collector switch shall be used to pull down SD externally. 8- Also, SD can be used as a fault condition output. Low output at SD indicates a fault situation. b- Fault Output Feature: 1- Pin 22, Flt is a dual function pin. It is internally pulled high. If pulled down, it will freeze the status of all the six MOSFETs regardless of the Hin and Lin signals 2- Pin 22 as an output reports desaturation protection activation. When desaturation protection is activated a low output for about 9 sec is reported. 3- If any other protection feature is activated, it will not be reported by Pin 22. c- Fault Clear Output: 1- Pin 23, Flt-Clr is a fault clear input. It can be used to reset a latching fault condition, due to desaturation protection. 2- Pin 23 is internally pulled down. A latching fault due to desaturation can be cleared by pulling high this input. 3- An internal fault clear is activated after 100 sec delay. If desired to clear the fault earlier, this input can be used. d- Signal Ground: Pin 20, Signal Gnd is the signal ground for all signals at Pins 19 through 27. This ground is internally connected to the +VDC Rtn. No external connection shall be established between Signal Gnd and +VDC Rtn. * 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 * * World Wide Web Site - http://www.sensitron.com * E-mail Address - sales@sensitron.com * Page 7 of 7 SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 * * World Wide Web - http://www.sensitron.com * E-Mail Address - sales@sensitron.com * |
Price & Availability of SPM6M070-020D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |